Is My Belt Tensioner Supposed To Move at Michael Jaffe blog

Is My Belt Tensioner Supposed To Move. after loosening that bolt (without removing it completely), you will be able to move the tensioner up or down depending on. absolutely you'll see it bouncing slightly. The reason is, the belt will stretch and contract slightly as the engine speeds up/slows down. without loads, it's hops slightly due to the temp of the belt, belt rib fluctuations on guiding pulleys, or belt sling from distant pulleys. Once worn, that same pulley arm can move up to ¼”; when you replace the belt, it should take a lot of muscle power to move the tensioner. diagnose a belt tensioner visually while the engine is running. If you can move it easily, the spring tension is most likely not tight enough. a belt tensioner pulley arm should not move more than 1/32”. Turn on the a/c and run the engine at idle speed. Then, shine a flashlight on the roller/pulley at the.

If you can move it easily, the spring tension is most likely not tight enough. when you replace the belt, it should take a lot of muscle power to move the tensioner. a belt tensioner pulley arm should not move more than 1/32”. The reason is, the belt will stretch and contract slightly as the engine speeds up/slows down. absolutely you'll see it bouncing slightly. Turn on the a/c and run the engine at idle speed. Then, shine a flashlight on the roller/pulley at the. without loads, it's hops slightly due to the temp of the belt, belt rib fluctuations on guiding pulleys, or belt sling from distant pulleys. after loosening that bolt (without removing it completely), you will be able to move the tensioner up or down depending on. diagnose a belt tensioner visually while the engine is running.

Belt tension trick YouTube

Is My Belt Tensioner Supposed To Move If you can move it easily, the spring tension is most likely not tight enough. Once worn, that same pulley arm can move up to ¼”; diagnose a belt tensioner visually while the engine is running. The reason is, the belt will stretch and contract slightly as the engine speeds up/slows down. without loads, it's hops slightly due to the temp of the belt, belt rib fluctuations on guiding pulleys, or belt sling from distant pulleys. when you replace the belt, it should take a lot of muscle power to move the tensioner. If you can move it easily, the spring tension is most likely not tight enough. absolutely you'll see it bouncing slightly. Then, shine a flashlight on the roller/pulley at the. a belt tensioner pulley arm should not move more than 1/32”. Turn on the a/c and run the engine at idle speed. after loosening that bolt (without removing it completely), you will be able to move the tensioner up or down depending on.